GL-Series Gantry Machining Center
High-performance milling performance
Professional solutions for different needs
Product parameters
PRODUCT PARAMETERS
GL-18L
GL-24L
GL-28L
GL-32L
GL-37L
GL-42L
| 產品型號 | G2518L | G3018L | G3518L | |
|---|---|---|---|---|
| Door width | mm | 1800 | 1800 | 1800 |
X-axis | mm | 2600 | 3100 | 3600 |
Y-axis Travel | mm | 1800 | 1800 | 1800 |
Z-axis | mm | 850(1050) | 850(1050) | 850(1050) |
From spindle nose to worktable face | mm | 200-1050(200-1250) | 200-1050(200-1250) | 200-1050(200-1250) |
| Table width | mm | 1600 | 1600 | 1600 |
T-slot | mm | 22 | 22 | 22 |
| bearing | t | 7 | 8 | 9 |
Spindle type | Belt 1:1.33 | Belt 1:1.33 | Belt 1:1.33 | |
| Spindle taper hole specification | BT50 | BT50 | BT50 | |
Spindle speed | rpm | 6000 | 6000 | 6000 |
Main motor power | kW | 15/18.5 | 15/18.5 | 15/18.5 |
Spindle Torque | N.m | 190/313 | 190/313 | 190/313 |
| Spindle box section | mm | 350×400 | 350×400 | 350×400 |
| X-axis Rapid Traverse | m/min | 16 | 16 | 12 |
| Y-axis Rapid Traverse | m/min | 16 | 16 | 16 |
| Z-axis Rapid Traverse | m/min | 16 | 16 | 16 |
Cutting Speed | m/min | 10 | 10 | 10 |
Positioning Accuracy X（half-closed loop ） | mm | 0.019 | 0.02 | 0.021 |
Positioning Accuracy Y（half-closed loop ） | mm | 0.018 | 0.018 | 0.018 |
Positioning Accuracy Z（half-closed loop ） | mm | 0.017 | 0.017 | 0.017 |
Repeatability Accuracy X（half-closed loop ） | mm | 0.014 | 0.015 | 0.016 |
Repeatability Accuracy Y（half-closed loop ） | mm | 0.012 | 0.012 | 0.012 |
Repeatability Accuracy Z（half-closed loop ） | mm | 0.008 | 0.008 | 0.008 |
| Power capacity | Kva | 30 | 30 | 30 |
| Air source pressure | Mpa | 0.65 | 0.65 | 0.65 |
Machine size height | mm | 4800 | 4800 | 4800 |
| Floor area (about) | mm×mm | 7885X5000 | 8885X5000 | 9885X5000 |
Machine weight | T | 20.5 | 22.5 | 24.5 |
| 產品型號 | G3024L | G3524L | G4024L | G4524L | |
|---|---|---|---|---|---|
| Door width | mm | 2400 | 2400 | 2400 | 2400 |
| X-axis | mm | 3000 | 3500 | 4000 | 4500 |
| Y-axis Travel | mm | 2400 | 2400 | 2400 | 2400 |
| Z-axis | mm | 850(1050) | 850(1050) | 850(1050) | 850(1050) |
| From spindle nose to worktable face | mm | 200-1050(200-1250) | 200-1050(200-1250) | 200-1050(200-1250) | 200-1050(200-1250) |
| Table width | mm | 1600 | 1600 | 1600 | 1800 |
| T-slot | mm | 22 | 22 | 22 | 22 |
| bearing | t | 7 | 8 | 9 | 11 |
| Spindle type | 皮帶1:1.33 | 皮帶1:1.33 | 皮帶1:1.33 | 皮帶1:1.33 | |
| Spindle taper hole specification | BT50 | BT50 | BT50 | BT50 | |
| Spindle speed | rpm | 6000 | 6000 | 6000 | 6000 |
| Main motor power | kW | 15/18.5 | 15/18.5 | 15/18.5 | 15/18.5 |
| Spindle Torque | N.m | 190/313 | 190/313 | 190/313 | 15/18.5 |
| Spindle box section | mm | 350×400 | 350×400 | 350×400 | 350×400 |
| X-axis Rapid Traverse | m/min | 12 | 12 | 12 | 12 |
| Y-axis Rapid Traverse | m/min | 12 | 12 | 12 | 12 |
| Z-axis Rapid Traverse | m/min | 12 | 12 | 12 | 12 |
| Cutting Speed | m/min | 8 | 8 | 8 | 8 |
Positioning Accuracy X（half-closed loop ） | mm | 0.02 | 0.021 | 0.022 | 0.025 |
Positioning Accuracy Y（half-closed loop ） | mm | 0.019 | 0.019 | 0.019 | 0.019 |
Positioning Accuracy Z（half-closed loop ） | mm | 0.017 | 0.017 | 0.017 | 0.017 |
Repeatability Accuracy X（half-closed loop ） | mm | 0.014 | 0.015 | 0.016 | 0.018 |
Repeatability Accuracy Y（half-closed loop ） | mm | 0.014 | 0.014 | 0.014 | 0.014 |
Repeatability Accuracy Z（half-closed loop ） | mm | 0.008 | 0.008 | 0.008 | 0.008 |
| Power capacity | Kva | 30 | 30 | 30 | 30 |
| Air source pressure | Mpa | 0.65 | 0.65 | 0.65 | 0.65 |
Machine size height | mm | 4800 | 4800 | 4800 | 4800 |
| Floor area (about) | mm×mm | 9800X5800 | 10800X5800 | 11800X5800 | 12800X5800 |
| Machine weight | T | 27 | 30 | 33.5 | 37 |
| 產品型號 | G3028L | G3528L | G4028L | G4528L | G5528L | G6528L | |
|---|---|---|---|---|---|---|---|
| Door width | mm | 2800 | 2800 | 2800 | 2800 | 2800 | 2800 |
| X-axis | mm | 3000 | 3500 | 4000 | 4500 | 5500 | 6500 |
| Y-axis Travel | mm | 3400 | 3400 | 3400 | 3400 | 3400 | 3400 |
| Z-axis | mm | 1250(1050) | 1250(1050) | 1250(1050) | 1250(1050) | 1250(1050) | 1250(1050) |
| From spindle nose to worktable face | mm | 200-1450(200-1250) | 200-1450(200-1250) | 200-1450(200-1250) | 200-1450(200-1250) | 200-1450(200-1250) | 200-1450(200-1250) |
| Table width | mm | 2200 | 2200 | 2200 | 2200 | 2200 | 2200 |
| T-slot | mm | 22 | 22 | 22 | 22 | 22 | 22 |
| bearing | t | 16 | 18 | 20 | 22 | 23 | 24 |
| Spindle type | Direct connection + reduction gearbox | Direct connection + reduction gearbox | Direct connection + reduction gearbox | Direct connection + reduction gearbox | Direct connection + reduction gearbox | Direct connection + reduction gearbox | |
| Spindle taper hole specification | BT50 | BT50 | BT50 | BT50 | BT50 | BT50 | |
| Spindle speed | rpm | 6000 | 6000 | 6000 | 6000 | 6000 | 6000 |
| Main motor power | kW | 22/26 | 22/26 | 22/26 | 22/26 | 22/26 | 22/26 |
| Spindle Torque | N.m | 770/910 | 770/910 | 770/910 | 770/910 | 770/910 | 770/910 |
| Spindle box section | mm | 450×450 | 450×450 | 450×450 | 450×450 | 450×450 | 450×450 |
| X-axis Rapid Traverse | m/min | 12 | 12 | 12 | 12 | 12 | 12 |
| Y-axis Rapid Traverse | m/min | 12 | 12 | 12 | 12 | 12 | 12 |
| Z-axis Rapid Traverse | m/min | 12 | 12 | 12 | 12 | 12 | 12 |
| Cutting Speed | m/min | 8 | 8 | 8 | 8 | 8 | 8 |
Positioning Accuracy X（half-closed loop ） | mm | 0.02 | 0.021 | 0.022 | 0.025 | 0.028 | 0.032 |
Positioning Accuracy Y（half-closed loop ） | mm | 0.022 | 0.022 | 0.022 | 0.022 | 0.022 | 0.022 |
Positioning Accuracy Z（half-closed loop ） | mm | 0.018 | 0.018 | 0.018 | 0.018 | 0.018 | 0.018 |
Repeatability Accuracy X（half-closed loop ） | mm | 0.015 | 0.016 | 0.017 | 0.018 | 0.02 | 0.022 |
Repeatability Accuracy Y（half-closed loop ） | mm | 0.017 | 0.017 | 0.017 | 0.017 | 0.017 | 0.017 |
Repeatability Accuracy Z（half-closed loop ） | mm | 0.008 | 0.008 | 0.008 | 0.008 | 0.008 | 0.008 |
| Power capacity | Kva | 50 | 50 | 50 | 50 | 50 | 50 |
| Air source pressure | Mpa | 0.65 | 0.65 | 0.65 | 0.65 | 0.65 | 0.65 |
Machine size height | mm | 6400 | 6400 | 6400 | 6400 | 6400 | 6400 |
| Floor area (about) | mm×mm | 9800X6600 | 10800X6600 | 11800X6600 | 12800X6600 | 14800X6600 | 16800X6600 |
| Machine weight | T | 40.5 | 43 | 45.5 | 47.5 | 50 | 52.5 |
| 產品型號 | G4532L | G5532L | G6532L | G8532L | G10532L | |
|---|---|---|---|---|---|---|
| Door width | mm | 3200 | 3200 | 3200 | 3200 | 3200 |
| X-axis | mm | 4500 | 5500 | 6500 | 8500 | 10500 |
| Y-axis Travel | mm | 3800 | 3800 | 3800 | 3800 | 3800 |
| Z-axis | mm | 1250(1050) | 1250(1050) | 1250(1050) | 1250(1050) | 1250(1050) |
| From spindle nose to worktable face | mm | 200-1450(200-1250) | 200-1450(200-1250) | 200-1450(200-1250) | 200-1450(200-1250) | 200-1450(200-1250) |
| Table width | mm | 2800 | 2800 | 2800 | 2800 | 2800 |
| T-slot | mm | 22 | 22 | 22 | 22 | 22 |
| bearing | t | 24 | 28 | 30 | 32 | 32 |
| Spindle type | Direct connection + reduction gearbox | Direct connection + reduction gearbox | Direct connection + reduction gearbox | Direct connection + reduction gearbox | Direct connection + reduction gearbox | |
| Spindle taper hole specification | BT50 | BT50 | BT50 | BT50 | BT50 | |
| Spindle speed | rpm | 6000 | 6000 | 6000 | 6000 | 6000 |
| Main motor power | kW | 22/26 | 22/26 | 22/26 | 22/26 | 22/26 |
| Spindle Torque | N.m | 770/910 | 770/910 | 770/910 | 770/910 | 770/910 |
| Spindle box section | mm | 450×450 | 450×450 | 450×450 | 450×450 | 450×450 |
| X-axis Rapid Traverse | m/min | 12 | 12 | 12 | 12 | 12 |
| Y-axis Rapid Traverse | m/min | 12 | 12 | 12 | 12 | 12 |
| Z-axis Rapid Traverse | m/min | 12 | 12 | 12 | 12 | 12 |
| Cutting Speed | m/min | 8 | 8 | 8 | 8 | 8 |
Positioning Accuracy X（half-closed loop ） | mm | 0.025 | 0.028 | 0.032 | 0.04 | 0.047 |
Positioning Accuracy Y（half-closed loop ） | mm | 0.025 | 0.025 | 0.025 | 0.025 | 0.025 |
Positioning Accuracy Z（half-closed loop ） | mm | 0.018 | 0.018 | 0.018 | 0.018 | 0.018 |
Repeatability Accuracy X（half-closed loop ） | mm | 0.018 | 0.02 | 0.022 | 0.026 | 0.029 |
Repeatability Accuracy Y（half-closed loop ） | mm | 0.018 | 0.018 | 0.018 | 0.018 | 0.018 |
Repeatability Accuracy Z（half-closed loop ） | mm | 0.008 | 0.008 | 0.008 | 0.008 | 0.008 |
| Power capacity | Kva | 50 | 50 | 50 | 50 | 50 |
| Air source pressure | Mpa | 0.65 | 0.65 | 0.65 | 0.65 | 0.65 |
Machine size height | mm | 6400 | 6400 | 6400 | 6400 | 6400 |
| Floor area (about) | mm×mm | 12800X7000 | 14800X7000 | 16800X7000 | 22800X7000 | 26800X7000 |
| Machine weight | T | 60.5 | 64.5 | 68.5 | 76.5 | 87 |
| 產品型號 | G6537L | G8537L | G10537L | G12537L | |
|---|---|---|---|---|---|
| Door width | mm | 3700 | 3700 | 3700 | 3700 |
| X-axis | mm | 6500 | 8500 | 10500 | 12500 |
| Y-axis Travel | mm | 4300 | 4300 | 4300 | 4300 |
| Z-axis | mm | 1250(1500) | 1250(1500) | 1250(1500) | 1250(1500) |
| From spindle nose to worktable face | mm | 200-1450(200-1700) | 200-1450(200-1700) | 200-1450(200-1700) | 200-1450(200-1700) |
| Table width | mm | 3200(3500) | 3200(3500) | 3200(3500) | 3200(3500) |
| T-slot | mm | 30 | 32 | 36 | 36 |
| bearing | t | 7 | 8 | 9 | 11 |
| Spindle type | Direct connection + reduction gearbox | Direct connection + reduction gearbox | Direct connection + reduction gearbox | Direct connection + reduction gearbox | |
| Spindle taper hole specification | BT50 | BT50 | BT50 | BT50 | |
| Spindle speed | rpm | 6000 | 6000 | 6000 | 6000 |
| Main motor power | kW | 22/26 | 22/26 | 22/26 | 22/26 |
| Spindle Torque | N.m | 770/910 | 770/910 | 770/910 | 770/910 |
| Spindle box section | mm | 450×450 | 450×450 | 450×450 | 450×450 |
| X-axis Rapid Traverse | m/min | 12 | 12 | 12 | 12 |
| Y-axis Rapid Traverse | m/min | 12 | 12 | 12 | 12 |
| Z-axis Rapid Traverse | m/min | 12 | 12 | 12 | 12 |
| Cutting Speed | m/min | 6 | 6 | 6 | 6 |
Positioning Accuracy X（half-closed loop ） | mm | 0.032 | 0.04 | 0.047 | 0.54 |
Positioning Accuracy Y（half-closed loop ） | mm | 0.028 | 0.028 | 0.028 | 0.028 |
Positioning Accuracy Z（half-closed loop ） | mm | 0.018 | 0.018 | 0.018 | 0.018 |
Repeatability Accuracy X（half-closed loop ） | mm | 0.022 | 0.026 | 0.029 | 0.034 |
Repeatability Accuracy Y（half-closed loop ） | mm | 0.019 | 0.019 | 0.019 | 0.019 |
Repeatability Accuracy Z（half-closed loop ） | mm | 0.008 | 0.008 | 0.008 | 0.008 |
| Power capacity | Kva | 50 | 50 | 50 | 50 |
| Air source pressure | Mpa | 0.65 | 0.65 | 0.65 | 0.65 |
Machine size height | mm | 6400 | 6400 | 6400 | 6400 |
| Floor area (about) | mm×mm | 16800X7500 | 22800X7500 | 26800X7500 | 31300X7500 |
| Machine weight | T | 89.5 | 105.5 | 121 | 135.5 |
| 產品型號 | G10542L | G12542L | G14542L | |
|---|---|---|---|---|
| Door width | mm | 4200 | 4200 | 4200 |
| X-axis | mm | 10500 | 12500 | 14500 |
| Y-axis Travel | mm | 4300(4800) | 4300(4800) | 4300(4800) |
| Z-axis | mm | 1250(1500) | 1250(1500) | 1250(1500) |
| From spindle nose to worktable face | mm | 200-1450(200-1700) | 200-1450(200-1700) | 200-1450(200-1700) |
| Table width | mm | 3500 | 3500 | 3500 |
| T-slot | mm | 28 | 28 | 28 |
| bearing | t | 36 | 36 | 36 |
| Spindle type | Direct connection + reduction gearbox | Direct connection + reduction gearbox | Direct connection + reduction gearbox | |
| Spindle taper hole specification | BT50 | BT50 | BT50 | |
| Spindle speed | rpm | 4500 | 4500 | 4500 |
| Main motor power | kW | 30/37 | 30/37 | 30/37 |
| Spindle Torque | N.m | 996.4/1228 | 996.4/1228 | 996.4/1228 |
| Spindle box section | mm | 450×450 | 450×450 | 450×450 |
| X-axis Rapid Traverse | m/min | 8 | 8 | 8 |
| Y-axis Rapid Traverse | m/min | 10 | 10 | 10 |
| Z-axis Rapid Traverse | m/min | 10 | 10 | 10 |
| Cutting Speed | m/min | 6 | 6 | 6 |
Positioning Accuracy X（half-closed loop ） | mm | 0.047 | 0.054 | 0.061 |
Positioning Accuracy Y（half-closed loop ） | mm | 0.029 | 0.029 | 0.029 |
Positioning Accuracy Z（half-closed loop ） | mm | 0.018 | 0.018 | 0.018 |
Repeatability Accuracy X（half-closed loop ） | mm | 0.029 | 0.034 | 0.04 |
Repeatability Accuracy Y（half-closed loop ） | mm | 0.019 | 0.019 | 0.019 |
Repeatability Accuracy Z（half-closed loop ） | mm | 0.008 | 0.008 | 0.008 |
| Power capacity | Kva | 80 | 80 | 80 |
| Air source pressure | Mpa | 0.65 | 0.65 | 0.65 |
Machine size height | mm | 6900 | 6900 | 6900 |
| Floor area (about) | mm×mm | 27800X8000 | 31300X8000 | 35300X8000 |
| Machine weight | T | 122 | 137 | 152 |
Product application
產品應用
application
application
application
application
application
Dimensional torque diagram
尺寸扭矩圖
Options
選配項
standard configuration
CNC FANUC 0I MF plus (5)
Spindle oil cooling system
auto lubrication system
Z-axis balance system
Workpiece air cooling system
Workpiece water cooling system
Automatic chip removal device
Internal protection
External protection
Cleaning air gun
alarm light
working light
Electric cabinet heat exchanger
spindle air curtain protection
Standard accessories
選配
CNC system: FANUC Oi MF (1)/
SIEMENS 828D
Full closed loop grating ruler
The stroke of Z axis is lengthened by 200mm
Overall heightening of column 200mm
Central effluent
Fully enclosed protection of machine tool
Spindle ring spray
Workpiece cleaning water gun
Oil water separation unit
Hydraulic balance
FANUC OI MF（5）15/18.5KW
Belt (1:1.77), 4500rpm, 253.3 / 417.3nm
Manual accessory milling head / head magazine
Semi automatic milling head / head magazine
Automatic workpiece measuring device
Automatic tool measuring device
Foot switch
Electric cabinet air conditioner
32T/40T Link ButtonDisc-type ATC-24T/30T
FANUC OI MF（1）18/35KW
Belt drive 1: 1.336000rpm, 156.9/296nm
FANUC OI MF（1）18/35KW
Belt drive 1: 1.774500rpm, 208.86/394nm
FANUC OI MF（1）18/30KW
Belt + reducer (1:4), 6000rpm, 472 / 764nm
Video display
Telephone
Products
About DEED
Contact US